PERMANENT MOUNT REVERSIBLE OIL CHANGE SYSTEM

Designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engine oil pans or transmission oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. Can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. Cover provides an attractive appearance, fully shrouding the entire pump and manifold system while providing added protection against accidental draining of an engine's oil supply. Valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, after an oil change the cover will not close unless the valves are in fully closed position. 12 or 24V operation.Meets ISO requirements, ignition protected. 1/2" NPT full flow ball type valves, Nirile impeller. Dimensions 11?L x 10-7/8?W x 5-1/4?H.